Runcam Hybrid 2 FPV Camera

This is the Runcam Hybrid 2 FPV Camera.

• RunCam Hybrid 2:
• True 145° Wide Angle 4K HD & FPV Camera
• HD FOV 145° | Fantastic FPV Effect | Single Board Design
• FOV 145° 4K recording:
• Customized high-quality 7 layers of glass lens +SONY sensor,
• wider FOV, better image quality.
• FPV image upgraded to “Phoenix 2”:
• Latency as low as 20MS, better FPV Image and more suitable for Free Style Flying
• Single board, simple installation:
• 20x20mm mounting sized single mainboard.
• Save more stack space.
• Compatible with more frames.
• QR code parameter settings:
• You can change resolution, shutter speed, ISO and so on through the RunCam App.
• Remote-control HD recording:
• After connecting Tx & Rx to the flight controller, you can easily start/stop recording by gently toggling the switch.

HD sensor: SONY 8MP

Analog sensor: SONY 1.3MP

Field of View (FOV): HD Recording FOV 145°(FPV FOV 150° @ 4: 3)

Video Resolution: [email protected] / [email protected] / [email protected] / [email protected] / [email protected] / [email protected] / [email protected]

Video File Format: MP4

TV Mode: NTSC (720*480)/PAL (720*576) Switchable

Interface: HD supports UART remote control; FPV(Analog) supports UART fimrware update.

Max Micro SD Card Supported: Up to 128G. Samsung’s U3 card is recommended (2.7K60/1080P120 requires U3 or above; other solutions require U1 or above) Please make sure that the file format of the SD card is FAT32, otherwise, it will easily cause errors.

Mounting Holes Distance: 20*20mm

PCB Size: 29*29mm

Lens Module Size: 19*25mm

Lens Specs: HD Lens: M10 / FPV Lens : M8

Power Input: DC 5-20V (Non-direct power supply from 4s battery or above. Powered directly with battery will generate surges and burn the camera.)

Working Current: 480mA @5V / 140mA @12V

Weight: 18g

Includes:

• (1) Hybrid 2 Camers
• (1) Plastic cover
• (1) 3PIN FPV silicone cable(male)
• (1) 3PIN FPV silicone cable(female)
• (1) Set of M2 screws
• (1) Manual