E-flite Power 160 Brushless Outrunner Motor w/4mm Bullets (245Kv)

The E-flite Power 160 Brushless Outrunner Motor with 4mm Bullets  is a great choice for scale and sport model airplanes. This motor is ideal for 160-size airplanes weighing 12-20lbs (5.4–9kg), 3D airplanes up to 15lbs (6.8 kg), or models requiring up to 2700 watts of power. Package includes one motor, one motor mount, two prop adapters, needed tools and hardware.

• Ideal for 3D airplanes up to 15lb (6.8 kg)
• High-quality construction with ball bearings and hardened 8mm steel shaft
• Includes mount and mounting hardware
• External rotor design for better cooling
• High-torque alternative to inrunner brushless motors
• Includes two 12mm prop shaft adapters tapped out for 10–32 threads
• Slotted 14-pole outrunner design
• Ideal for models requiring up to 2700 watts of power
• Equivalent to or surpassing the power of a 160-size, 2-stroke, glow engine for 12–20 lb (5.4–9 kg) airplanes

RPM/Volt (Kv): 245

Voltage: 33.3–38.4 (9-10S LiPo – 28-32 cell NiMH)

Idle Current (Io): 1.45A @ 10V

Recommended Propeller Range: 18×8 to 20×10

Motor Design: Outrunner

Motor Type: Brushless

Wire Gauge: 13 AWG

Connector Type: 4mm Bullet

Bushing Or Bearing: Bearing

Shaft Diameter: 8mm (.30 in) (Includes two 12mm threaded prop shaft adapters with 1.5 pitch) 

Needed to Complete: 

• (1) 75-110A HV Brushless ESC
• (1) 9-10S LiPo Battery or 28-32 cell NiMH
• (1) 18×8 – 20×10 Propeller